The recent popularity of microservices has made the need for safe, reliable service-to-service communication more apparent than ever. Envoy’s lightweight footprint, powerful routing constructs, and flexible observability support make it a great proxy to build a service mesh on. In this configuration, Envoy acts as the primary load balancer for requests between internal services. Managing this public traffic—also called “East/West” traffic—is trivial in an environment with a small number of services, but with tens or hundreds of services making calls to one another, it’s combinatorially more complex.
That's where the Envoy service mesh comes in. This is a complementary deployment to a Front Proxy, where Envoy handles traffic from the outside world (aka north-south traffic).
A basic Service Mesh uses Envoy sidecars to handle outbound traffic for each service instance. This allows Envoy to handle load balancing and resilience strategies for all internal calls, as well as providing a coherent layer for observability. Services are still exposed to the internal network, and all network calls pass through an Envoy on
localhost. Rolling out a basic Service Mesh can be done one service at a time, making it a practical first step for most Envoy deployments.
Kubernetes makes adding Envoy sidecars easy. You’ll need to do two things:
How you want to configure Envoy will vary depending on your environment—more on that below. If you want to use fully dynamic configuration, you can use a container like envoy-simple and set the location of the various configuration services with environment variables.
- image: turbinelabs/envoy-simple:0.17.2 imagePullPolicy: Always name: envoy-simple ports: - containerPort: 8000 env: - name: ENVOY_XDS_HOST value: "rotor.default.svc.cluster.local" - name: ENVOY_XDS_PORT value: "50000"
Since Pods share the same notion of localhost, you can simply change your service to have them call localhost on port 8000 with the correct Host header set, instead of calling the remote service. If you’re using Kubernetes’ Services, you can override the environment variables (e.g.
SERVICENAME_SERVICE_PORT) or Kubernetes’ DNS with your Envoy’s listener value.
Outside of Kubernetes, you have much more flexibility in how you deploy Envoy. You can run either the Envoy container or the binary on your hosts. Similar to Kubernetes, by running Envoy on localhost, you only have to change your services to communicated with Envoy on the port you specify.
Docker, listening on port 8000:
$ docker run -d \ -e 'ENVOY_XDS_HOST=127.0.0.1' \ -e 'ENVOY_XDS_PORT=50000' \ -p 8000:8000 \ turbinelabs/envoy-simple:0.17.2
Next, you should modify your services to route through Envoy. If changing their configuration or code isn’t possible, you can force all outbound traffic through Envoy with something like /etc/hosts or iptables.
The easiest way to get started is to have Envoy handle traffic just the name as your internal network does. Practically, this means three things:
Expose a single listener for your services to send outbound traffic to. This matches with the port exposed on your container, e.g. 8000 in the ex ample configs above. Inbound traffic skips Envoy and continues to talk directly to the services. Adding a listener to handle incoming traffic will be covered in Advanced Service Mesh (coming soon!).
Serve the full route table in all sidecars. B By exposing all services to all other services, you’ll ensure nothing breaks on the first iteration. If you have a Front Proxy, re-using these routes can save time. If not, it’s straightforward to create a basic set of routes and listeners in a static Envoy configuration file. Once that’s working in production, it may make sense to limit the routes available for each service. The explicit routing between services helps service teams understand where their internal traffic is coming from, helping them define mutual SLOs.
Consider using dynamic configuration for instance discovery in the first iteration. Specifically, using EDS to update Envoy’s notion of available hosts with an EDS server like Rotor keeps Envoy’s routing tables in sync with the underlying infrastructure. Envoy can use static configuration for listeners and routes, so it’s simple and valuable to set up a control plane to manage instance availability.
If you’ve been following the examples above, you can set up Rotor, an Envoy control plane and service discovery bridge, to implement xDS. Remember that Envoy can mix static and dynamic configuration, so if you want to statically configure listeners, routes, and clusters (LDS / RDS / CDS), you can use your own Envoy container with a static config file while still using a dynamic EDS control plane. Eventually, there are good reasons to move to a fully dynamic system.
One of the biggest benefits of a service mesh is that it provides a uniform view over your services. Each service will certainly have metrics and tooling unique to it, but Envoy provides a simple way to get the same high-level metrics for all services. Keep the following principles in mind when deciding which metrics to look at:
Pick metrics that relate to customer experience. IIn particular, Envoy can generate request volume, request rate, and latency histograms. Resource metrics like number of connections or amount of network traffic can mean different things on different services. See how Lyft does it here.
Segmentation of simple metrics, not more types of metrics. Envoy can produce a stunning number of metrics. Teams with lots of services tend to get more value out of a small set of metrics, segmented by service, instance, and region
Add tracing in Envoy. Since Envoy is present at every network hop, it’s guaranteed to capture all intra-instance communication. This means that a single configuration can produce complete traces across the entire mesh. That’s a powerful framework to add more detailed custom instrumentation. Note: you will have to propagate headers through each service to create full traces.
As described in Front Proxy, you should have one front proxy per datacenter. When setting up a mesh, it’s generally safer to send intra-data center traffic to the remote front proxy, instead of exposing all of the internals to all datacenters. This can simplify incident management as well, because changes to a single region are less likely to affect other regions.
This also means you should split up the configs. Generally you can do this by running a different control plane in each data center. If you want to run a single control plane, check out the discussion of Locality in Advanced Service Mesh (coming soon!).
In this setup, you would still map each service to a single Envoy cluster, but instead of including the remote instances, you’d include the remote front proxy as the out-of-zone instance in the cluster.
While this article has focused on how to handle traffic between services, it's also possible for Envoy to handle traffic from the public internet (“North/South” traffic) as a Front Proxy. The service mesh and front proxy have a lot of overlapping features, so it can be useful to consider how to roll them both out.
Beyond that, you can set up Envoy to also handle incoming traffic on each node within your service mesh. This gives better isolation between services and better observability.